Effect of thermal diffusion and electrostatic force on evolution of wind-blown sand flow

A theoretical model is suggested to mathematically describe the effect of thermal diffusion from a sand-bed on evolution of a wind-blown sand flow.An upward wind field is engendered by the thermal diffusion and the coupling interaction among the horizontal and upward wind flow,saltating grains,and a kind of electrostatic force exerted on the grains are considered in this theoretical model.The numerical results show that the effect of the thermal diffusion on the evolution process of wind-blown grain flow is quite obvious and very similar to the effect of the electrostatic force on the evolution.Not only the time for the entire system to reach a steady state(called the duration time),the transport rate of grains,the mass-flux profiles and the trajectory of saltating grains are affected by the thermal diffusion and the electrostatic force exerted on saltating grains, but also the wind profiles and the temperature profiles at the steady state are affected by the wind-blown sand flow.     

The heat capacity of small metallic grains studied by the random matrices theory

The random matrices theory is applied to a study of the heat capacity of small metallic grains. The numerical calculations indicate that the level distribution and the difference between the particles respectively with an even and an odd numbers of electrons are important for the heat capacity of the small metallic grains at a low temperature and the level correlation mainly affects the heat capacity at a high temperature.     

片状卤化银微晶的单分散性研究

片状颗粒以及板状双层及多层结构晶体的出现,促使高感光度彩色胶卷的面世。T-颗粒是当今卤化银乳剂复合结构的一种很重要的类型。由于它具有一系列优点:表面/体积比值高,受光面积大,侧向散射少,染料吸附量多而越来越受到人们的关注。     

Time Evolution of Microbial Composition and Metabolic Profile for Biogenic Amines and Free Amino Acids in a Model Cucumber Fermentation System Brined with 0.5% to 5.0% Sodium Chloride

Salt concentrations in brine and temperature are the major environmental factors that affect activity of microorganisms and, thus may affect formation of biogenic amines (BAs) during the fermentation process. A model system to ferment cucumbers with low salt (0.5%, 1.5% or 5.0% NaCl) at two temperatures (11 or 23 °C) was used to study the ability of indigenous microbiota to produce biogenic amines and metabolize amino acid precursors. Colony counts for presumptive Enterococcus and Enterobacteriaceae increased by 4 and up to 2 log of CFU∙mL⁻¹, respectively, and remained viable for more than 10 days. 16S rRNA sequencing showed that Lactobacillus and Enterobacter were dominant in fermented cucumbers with 0.5% and 1.5% salt concentrations after storage. The initial content of BAs in raw material of 25.44 ± 4.03 mg∙kg⁻¹ fluctuated throughout experiment, but after 6 months there were no significant differences between tested variants. The most abundant BA was putrescine, that reached a maximum concentration of 158.02 ± 25.11 mg∙kg⁻¹. The Biogenic Amines Index (BAI) calculated for all samples was significantly below that needed to induce undesirable effects upon consumption. The highest value was calculated for the 23 °C/5.0% NaCl brine variant after 192 h of fermentation (223.93 ± 54.40). Results presented in this work indicate that possibilities to control spontaneous fermentation by changing salt concentration and temperature to inhibit the formation of BAs are very limited.     

Phase transitions and critical phenomena of tiny grains carbon films synthesized in microwave-based vapor deposition system

Different peak trends of tiny grains carbon film have been observed under the investigations of the Raman spectroscopy and energy loss spectroscopy. Carbon films known in nanocrystalline and ultrananocrystalline diamond films are synthesized by employing microwave-based vapor deposition system. Carbon atoms exhibit several state behaviors depending on the incurred positions of their electrons. Different morphology of tiny grains under different chamber pressure is related to different rate of arriving typical energies at/near substrate surface. Those tiny grains of carbon film, which evolved in graphitic state atoms are converted to structure of smooth elements where elongation of atoms of one-dimensional arrays is as per exerting surface format forces along opposite poles from their centers. Such tiny grains in the film are the cause of v₁ peak under the investigation of the Raman spectrum because of the enhanced propagation of input laser signals through channelized inter-state electron gaps of elongated graphitic state atoms. Those tiny grains of carbon film, which evolved in fullerene state are the cause of v₂ peak. The tiny grains related to v₁ peak possess a low intensity as compared with the ones which comprised atoms having state behaviors known in their exceptional hardness. Tiny grains representing v₁ peak in the Raman spectrum are also the cause of field emission characteristic of a carbon film. Different peak recordings were made for the Raman at defined positions indicating a different state of carbon atoms for a different phase of deposited tiny grains, which is in line to their energy loss spectroscopy.     

无烟煤掺混白酒酒糟制备生物质水煤浆

利用白酒酒糟与贵州无烟煤按不同比例掺混制备生物质水煤浆(BCWS),考查了酒糟掺混量、添加剂种类及含量对水煤浆成浆性能的影响。结果表明,在萘磺酸系添加剂(MF、NNO)和木质素磺酸钙(LS)三种添加剂中,MF的分散效果要优于其他两种,且添加量为0.5%时最佳;表观黏度为1 000 m Pa·s时,无烟煤单独制浆最大成浆浓度为70%,而掺混3%(干基)酒糟的BCWS定黏浓度为65.8%,浆体稳定性在3d以上;BCWS属于宾汉塑性流体,酒糟含有大量的亲水性含氧官能团,以及其管束和脉络结构,会引起BCWS表观黏度的升高,有利于提高BCWS的稳定性。     

Tailoring Properties of Resol Resin-Derived Spherical Carbons for Adsorption of Phenol from Aqueous Solution

The polycondensation of resorcinol and formaldehyde in a water–ethanol mixture using the adapted Stöber method was used to obtain resol resins. An optimization of synthesis conditions and the use of an appropriate stabilizer (e.g., poly(vinyl alcohol)) resulted in spherical grains. The resins were carbonized in the temperature range of 600–1050 °C and then chemically activated in an aqueous HNO₃ solution, gaseous ammonia, or by an oxidation–reduction cycle (soaking in a HNO₃ solution followed by treatment with NH₃). The obtained carbons were characterized by XRD, the low-temperature adsorption of nitrogen, SEM, TGA, and XPS in order to determine degree of graphitization, porosity, shape and size of particles, and surface composition, respectively. Finally, the materials were tested in phenol adsorption. The pseudo-second order model perfectly described the adsorption kinetics. A clear correlation between the micropore volume and the adsorption capacity was found. The content of graphite domains also had a positive effect on the adsorption properties. On the other hand, the presence of heteroatoms, especially oxygen groups, resulted in the clogging of the pores and a decrease in the amount of adsorbed phenol.     

Effect of texture and grain shape on ultrasonic backscattering in polycrystals

An ultrasonic backscattering model is developed for textured polycrystalline materials with orthotropic or trigonal grains of ellipsoidal shape. The model allows us to simulate realistic microstructures and orthotropic macroscopic material textures resulting from thermomechanical processing for a broad variety of material symmetries. The 3-D texture is described by a modified Gaussian orientation distribution function (ODF) of the crystallographic orientation of the grains along the macroscopic texture direction. The preferred texture directions are arbitrary relative to the axes of the ellipsoidal grains. The averaged elastic covariance and the directional anisotropy of the backscattering coefficient are obtained for a wave propagation direction arbitrary relative to the texture and grain elongation directions. One particular application of this analysis is the backscattering solution for cubic crystallites with common textures such as Cube, Goss, Brass and Copper. In our analysis, in the texture-defined coordinates the matrix of elastic constants for cubic crystallites takes the form of orthotropic or trigonal symmetry. Numerical results are presented, discussed and compared to the experimental data available in the literature illustrating the dependence of the backscattering coefficient on texture and grain shape.     

粮谷中11种二硝基苯胺类除草剂残留量的气相色谱-串联质谱法测定

建立了粮谷中11种二硝基苯胺类除草剂残留量的气相色谱-串联质潜(GC-MS/MS)测定方法,样品经乙腈提取、QuEChERS法净化,采用GC-MS/MS在多反应监测模式下进行快速分析,外标法定量.在优化实验条件下,11种二硝基苯胺类除草剂的线性范围均为1.0～20.0μg/L,相关系数大于0.996,方法定量下限为5μ...     

Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques

A C-scan ultrasonic imaging system was used to investigate the microstructural evolution during dynamic recrystallization (DRX) of a 15Cr–15Ni–2.2Mo–Ti modified austenitic stainless steel (alloy D9). Four specimens were forged at 1273 K to different strains in the range 0.1–0.5. Specimens with true strains of 0.2 or lower did not show any variation in the amplitude of the first back-wall echo. However, a visible variation in the C-scan image was observed at and above the 0.3 strain level. This variation was attributed to the evolution of fine grains. The formation of fine grains was related to DRX, as indicated by electron backscattered diffraction. This study also revealed the characteristics of the DRX or ‘necklace grains’, as opposed to the so-called parent grains or rest of the microstructure.